-
Silvestroni L, Gilli N, Sangiorgi A, et al. Multi-phase (Zr,Ti,Cr)B2 solid solutions: Preparation, multi-scale microstructure, and local properties. Journal of Advanced Ceramics, 2023, 12(2): 414-431.
Keywords: boride, core–shell, solid solution, nanoindentation, sintering
-
Chen L, Luo K, Li B, et al. Mechanical property enhancements and amorphous thermal transports of ordered weberite-type RE3Nb/TaO7 high-entropy oxides. Journal of Advanced Ceramics, 2023, 12(2): 399-413.
Keywords: high-entropy oxides (HEOs), RE niobates/tantalatesstiffness, fracture toughness, thermal transports
-
Lu Y-H, Huang L, Liu M-J, et al. Heterogeneous layered structure in thermal barrier coatings by plasma spray-physical vapor deposition. Journal of Advanced Ceramics, 2023, 12(2): 386-398.
Keywords: transient temperature, in-situ deposit surface, heterogeneous layered structure, fracture mechanism, plasma spray-physical vapor deposition (PS-PVD)
-
Liu Q, Pan E, Liu F, et al. (K,Na)NbO3-based lead-free ceramics with enhanced temperature-stable piezoelectricity and efficient red luminescence. Journal of Advanced Ceramics, 2023, 12(2): 373-385.
Keywords: piezoelectric, thermal stability, rare-earth, lead-free, potassium-sodium niobate (KNN)
-
Wu Z, Li S, Fan X, et al. In-situ preparation of robust self-lubricating composite coating from thermally sprayed ceramic template. Journal of Advanced Ceramics, 2023, 12(2): 357-372.
Keywords: self-lubricating ceramic coatings, thermal spray, in-situ synthesis, MoS2/C, friction and wear, mechanical properties
-
Sun J, Zhao J, Zhou Y, et al. High-performance multifunctional (Hf0.2Nb0.2Ta0.2Ti0.2Zr0.2)C high-entropy ceramic reinforced with low-loading 3D hybrid graphene–carbon nanotube. Journal of Advanced Ceramics, 2023, 12(2): 341-356.
Keywords: high-entropy ceramic (HEC), three-dimensional graphene–carbon nanotube (3D G–CNT), toughening, lubricating, thermal conductivity (κ)/electrical conductivity (σ)
-
Liu Y, Huang X, Yan X, et al. Pushing the limits of microwave absorption capability of carbon fiber in fabric design based on genetic algorithm. Journal of Advanced Ceramics, 2023, 12(2): 329-340.
Keywords: broadband microwave absorption, carbon fiber, impedance matching, periodical long continuous carbon/glass fiber fabric (PCGF), multiple loss mechanism
-
He H, Shao G, Zhao R, et al. Oscillatory pressure-assisted sinter forging for preparation of high-performance SiC whisker reinforced Al2O3 composites. Journal of Advanced Ceramics, 2023, 12(2): 321-328.
Keywords: sintering, oscillatory pressure-assisted sinter forging (OPSF), densification, mechanical property, ceramic composites
-
Wang L, Cai Z, Su L, et al. Bifunctional SiC/Si3N4 aerogel for highly efficient electromagnetic wave absorption and thermal insulation. Journal of Advanced Ceramics, 2023, 12(2): 309-320.
Keywords: bicontinuous network, SiC nanowires, impedance matching, electromagnetic (EM) wave absorption, extreme conditions
-
Yang H, Chai L, Liang G, et al. Structure, far-infrared spectroscopy, microwave dielectric properties, and improved low-temperature sintering characteristics of tri-rutile Mg0.5Ti0.5TaO4 ceramics. Journal of Advanced Ceramics, 2023, 12(2): 296-308.
Keywords: crystal structure, low-temperature sintering
-
Shao J, Bai C, Li X, et al. Open-cell mullite ceramic foams derived from porous geopolymer precursors with tailored porosity. Journal of Advanced Ceramics, 2023, 12(2): 279-295.
Keywords: porous mullite ceramic, porosity, porous geopolymer precursor, direct foaming, nanophase strengthening
-
Fu J, Feng S, Guo Y, et al. Ce3+:Lu3Al5O12–Al2O3 optical nanoceramic scintillators elaborated via a low-temperature glass crystallization route. Journal of Advanced Ceramics, 2023, 12(2): 268-278.
Keywords: glass crystallization, garnet antisite defects, Lu3Al5O12–Al2O3 (LuAG–Al2O3) transparent ceramics, nanoceramics, scintillation
-
Yin H, He X, Song G, et al. Ultra-fast synthesis and thermodynamic analysis of MoAlB by self-propagating high-temperature combustion synthesis. Journal of Advanced Ceramics, 2023, 12(2): 258-267.
Keywords: MAB phases, combustion synthesis, thermodynamics, self-propagating high-temperature synthesis (SHS)
-
Li J, Zhou Y, Su Y, et al. Synthesis and mechanical and elevated temperature tribological properties of a novel high-entropy (TiVNbMoW)C4.375 with carbon stoichiometry deviation. Journal of Advanced Ceramics, 2023, 12(2): 242-257.
Keywords: high-entropy ceramics (HECs), transition metal (TM) carbides, carbon stoichiometry deviation, tribological performances, wear
-
Lai H, Peng Y, Wang M, et al. Thermoelectric enhancement of p-type Si80Ge20 alloy via co-compositing of dual oxides: Respective regulation for power factor and thermal conductivity by β-Ga2O3 and SiO2 aerogel powders. Journal of Advanced Ceramics, 2023, 12(2): 228-241.
Keywords: thermoelectric (TE) materials, SiGe, average velocity of sound, hierarchical scattering
-
He X, Chai H, Luo Y, et al. Metal oxide semiconductor gas sensing materials for early lung cancer diagnosis. Journal of Advanced Ceramics, 2023, 12(2): 207-227.
Keywords: gas sensors, metal oxides, exhaled breath analysis, lung cancer (LC) diagnosis
-
CHENG H, ZHAI X, OUYANG J, et al. Achieving a high energy storage density in Ag(Nb,Ta)O3 antiferroelectric films via nanograin engineering. Journal of Advanced Ceramics, 2023, 12(1): 196-206.
Keywords: antiferroelectrics (AFE), AgNbO3, energy storage, film capacitors, nanograin engineering
-
ZHAO J, WANG D, JIN X, et al. Highly electro-conductive B4C–TiB2 composites with three-dimensional interconnected intergranular TiB2 network. Journal of Advanced Ceramics, 2023, 12(1): 182-195.
Keywords: reactive sintering (RS), electrical conductivity, mechanical properties, electro-conductive network
-
SHI Z-A, WU J-M, FANG Z-Q, et al. Influence of high-temperature oxidation of SiC powders on curing properties of SiC slurry for digital light processing. Journal of Advanced Ceramics, 2023, 12(1): 169-181.
Keywords: silicon carbide (SiC) powders, oxidation modification, digital light processing (DLP), ultraviolet (UV) absorptivity, curing depth
-
MOR M, VINCI A, FAILLA S, et al. A novel approach for manufacturing of layered, ultra-refractory composites using pliable, short fibre-reinforced ceramic sheets. Journal of Advanced Ceramics, 2023, 12(1): 155-168.
Keywords: ultra-high-temperature ceramics (UHTCs), ceramic matrix composites (CMCs), short carbon fibres, mechanical properties
-
DOU L, YANG B, LAN S, et al. Nanonet-/fiber-structured flexible ceramic membrane enabling dielectric energy storage. Journal of Advanced Ceramics, 2023, 12(1): 145-154.
Keywords: BiFeO3/SiO2 dual-network, flexible, mechanically robust, dielectric energy storage
-
ZHANG R, GUO F, ZHANG X, et al. ZrB2–SiC spiral fibers prepared by combining liquid rope effect with non-solvent-induced phase separation method: A promising toughening material for ultra-high temperature ceramics. Journal of Advanced Ceramics, 2023, 12(1): 132-144.
Keywords: ultra-high-temperature ceramics (UHTCs), spiral fibers, liquid rope effect, structure control, fracture toughness
-
TANG S-J, GUO W-M, SUN S-K, et al. Design strategy of phase and microstructure of Si3N3 ceramics with simultaneously high hardness and toughness. Journal of Advanced Ceramics, 2023, 12(1): 122-131.
Keywords: silicon nitride, phase composition, microstructure, hardness, toughness
-
ZHOU L, LIU J-X, TU T-Z, et al. Fast grain growth phenomenon in high-entropy ceramics: A case study in rare-earth hexaaluminates. Journal of Advanced Ceramics, 2023, 12(1): 111-121.
Keywords: high-entropy ceramics, rare-earth hexaaluminate, fast grain growth, electrical conductivity
-
ZHANG Z, JI J, CHEN Y, et al. Formation mechanisms of Ti3(Si,Al)C2/Al2O3 composites from Ti3AlC2 and SiO via low-temperature sintering. Journal of Advanced Ceramics, 2023, 12(1): 93-110.
Keywords: aluminum oxide (Al2O3), current-assisted sintering (CAS), silicon monoxide (SiO)
-
BAO J, ZHANG Y, KIMURA H, et al. Crystal structure, chemical bond characteristics, infrared reflection spectrum, and microwave dielectric properties of Nd2(Zr1-xTix)3(MoO4)9 ceramics. Journal of Advanced Ceramics, 2023, 12(1): 82-92.
Keywords: microwave dielectric ceramics (MWDCs), Phillips–van Vechten–Levine (P–V–L) theory, theoretical dielectric loss
-
IKESUE A, AUNG YL. Anisotropic alumina ceramics with isotropic optical properties. Journal of Advanced Ceramics, 2023, 12(1): 72-81.
Keywords: alumina, anisotropy, isotropy, fracture toughness, optical ceramics, grain boundary phase
-
LI S, PENG Z, FU X. Zn0.5Co0.5Mn0.5Fe0.5Al0.5Mg0.5O4 high-entropy oxide with high capacity and ultra-long life for Li-ion battery anodes. Journal of Advanced Ceramics, 2023, 12(1): 59-71.
Keywords: coprecipitation method, high-entropy oxide (HEO), Li-ion batteries (LIBs), anode
-
CHEN L, ZHANG W, LU W, et al. Low thermal conductivity of dense (TiZrHfVNbTa)Cx high-entropy carbides by tailoring carbon stoichiometry. Journal of Advanced Ceramics, 2023, 12(1): 49-58.
Keywords: high-entropy carbides, thermal conductivity, compositional complexity, carbon vacancies
-
ZHANG X, XU N, JIANG Y, et al. Robust, fire-resistant, and thermal-stable SiZrNOC nanofiber membranes with amorphous microstructure for high-temperature thermal superinsulation. Journal of Advanced Ceramics, 2023, 12(1): 36-48.
Keywords: amorphous microstructure, SiZrNOC nanofiber, thermal stability, thermal insulation
-
XIE Y, PENG Y, WANG Y, et al. Development of lutetium oxide continuous fibers with excellent mechanical properties. Journal of Advanced Ceramics, 2023, 12(1): 24-35.
Keywords: lutetium oxide (Lu2O3), continuous fibers, tensile strength, flexible, temperature resistance
-
LI C-B-W, LI Z, WANG J, et al. Sodium lithium niobate lead-free piezoceramics for high-power applications: Fundamental, progress, and perspective. Journal of Advanced Ceramics, 2023, 12(1): 1-23.
Keywords: sodium lithium niobate, lead-free, piezoelectric performance, high-power applications
-
QIU P, LIU B, WU L, et al. K-doped BaCo0.4Fe0.4Zr0.2O3-δ as a promising cathode material for protonic ceramic fuel cells. Journal of Advanced Ceramics, 2022, 11(12): 1988-2000.
Keywords: proton transport, proton-conducting cathode, protonic ceramic fuel cells (PCFCs), triple-conducting, hydration capability
-
HUANG Z, SHI Y, ZHANG Y, et al. An effective strategy for preparing transparent ceramics using nanorod powders based on pressure-assisted particle fracture and rearrangement. Journal of Advanced Ceramics, 2022, 11(12): 1976-1987.
Keywords: transparent ceramics, nanorods, fracture and rearrangement, Y2O3, spark plasma sintering (SPS)
-
YE Z, ZENG Y, XIONG X, et al. Elucidating the role of preferential oxidation during ablation: Insights on the design and optimization of multicomponent ultra-high temperature ceramics. Journal of Advanced Ceramics, 2022, 11(12): 1956-1975.
Keywords: multicomponent ceramics, ultra-high temperature ceramics (UHTCs), preferential oxidation, oxidation behavior, ablation resistance
-
ZHENG L, LI H, ZHOU J, et al. Layer-structured Cr/CrxN coating via electroplating-based nitridation achieving high deuterium resistance as the hydrogen permeation barrier. Journal of Advanced Ceramics, 2022, 11(12): 1944-1955.
Keywords: hydrogen permeation, electrodeposition, thermal shock resistance
-
FAN S, SUN T, JIANG M, et al. In-situ growth of carbon nanotubes on ZnO to enhance thermoelectric and mechanical properties. Journal of Advanced Ceramics, 2022, 11(12): 1932-1943.
Keywords: ZnO, carbon nanotubes (CNTs), in-situ grown, thermoelectric (TE), mechanical properties
-
ZHANG X, ZHANG K, ZHANG B, et al. Mechanical properties of additively-manufactured cellular ceramic structures: A comprehensive study. Journal of Advanced Ceramics, 2022, 11(12): 1918-1931.
Keywords: cellular ceramic structures (CCSs), mechanical properties, failure mode, structural parameters
-
CHEN P, XIAO P, TANG X, et al. Corrosion behavior and failure mechanism of SiC whisker and c-AlPO4 particle-modified novel tri-layer Yb2Si2O7/mullite/SiC coating in burner rig tests. Journal of Advanced Ceramics, 2022, 11(12): 1901-1917.
Keywords: tri-layer, sol–gel, burner rig test
-
PENG Y, YU Z, ZHAO J, et al. Unique sandwich design of high-efficiency heat-conducting phosphor-in-glass film for high-quality laser-driven white lighting. Journal of Advanced Ceramics, 2022, 11(12): 1889-1900.
Keywords: laser-driven lighting, phosphor-in-glass (PiG) film, sandwich structure, color quality, heat dissipation
-
LI H, SHEN Q, ZHANG H, et al. Oxygen vacancy-mediated WO3 phase junction to steering photogenerated charge separation for enhanced water splitting. Journal of Advanced Ceramics, 2022, 11(12): 1873-1888.
Keywords: phase transition, tungsten oxide, lattice mismatch, density functional theory (DFT), photoelectrocatalytic water splitting
-
ZHANG M, LIU K, ZHANG X, et al. Interfacial energy barrier tuning of hierarchical Bi2O3/WO3 heterojunctions for advanced triethylamine sensor. Journal of Advanced Ceramics, 2022, 11(12): 1860-1872.
Keywords: heterojunctions, hierarchical structures, triethylamine (TEA), gas sensors
-
XU Y, YU S, YIN Y, et al. Taking advantage of Li-evaporation in LiCoO2 as cathode for proton-conducting solid oxide fuel cells. Journal of Advanced Ceramics, 2022, 11(12): 1849-1859.
Keywords: cathode, composite, proton conductor, solid oxide fuel cells (SOFCs)
-
ZHU D, NIKL M, CHEWPRADITKUL W, et al. Development and prospects of garnet ceramic scintillators: A review. Journal of Advanced Ceramics, 2022, 11(12): 1825-1848.
Keywords: garnet ceramics, inorganic scintillators, single crystals, scintillation performance
-
MIAO B, WANG J, LI J, et al. Sintering and mechanical properties of carbon bulks from ordered mesoporous carbon and nano diamond. Journal of Advanced Ceramics, 2022, 11(11): 1815-1823.
Keywords: mesoporous carbon, nanodiamond (ND), carbon material, high strength
-
CHENG F, ZHANG F, LIU Y, et al. Ti4+-incorporated fluorite-structured high-entropy oxide (Ce,Hf,Y,Pr,Gd)O2-δ: Optimizing preparation and CMAS corrosion behavior. Journal of Advanced Ceramics, 2022, 11(11): 1801-1814.
Keywords: high-entropy ceramics (HECs), fluorite structure, high-temperature stability, calcium–magnesium–alumina–silicate (CMAS) corrosion
-
XING Y, LU X, LI Y, et al. Self-assembled Ag4V2O7/Ag3VO4 Z-scheme heterojunction by pH adjustment with efficient photocatalytic performance. Journal of Advanced Ceramics, 2022, 11(11): 1789-1800.
Keywords: self-assembly, heterojunction, Z scheme, photocatalysis
-
NIU X, JIAN X, GONG W, et al. Field-driven merging of polarizations and enhanced electrocaloric effect in BaTiO3-based lead-free ceramics. Journal of Advanced Ceramics, 2022, 11(11): 1777-1788.
Keywords: lead-free ferroelectric, microstructure, permittivity, polarization, electrocaloric effect (ECE)
-
ZHANG Q, ZHOU Y, SAN X, et al. Zr2SeB and Hf2SeB: Two new MAB phase compounds with the Cr2AlC-type MAX phase (211 phase) crystal structures. Journal of Advanced Ceramics, 2022, 11(11): 1764-1776.
Keywords: first-principles calculations, thermal explosion synthesis
-
LIU H, SU H, SHEN Z, et al. Formation mechanism and roles of oxygen vacancies in melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramic by laser 3D printing. Journal of Advanced Ceramics, 2022, 11(11): 1751-1763.
Keywords: oxide eutectic ceramic, laser three-dimensional (3D) printing, oxygen vacancy, microstructure, mechanical property
-
YANG W, WANG J, GAO S, et al. Photo-assisted charging of carbon fiber paper-supported CeO2/MnO2 heterojunction and its long-lasting capacitance enhancement in dark. Journal of Advanced Ceramics, 2022, 11(11): 1735-1750.
Keywords: supercapacitors, photo-assisted charging, long-lasting effect in dark, slow release of stored electrons
-
LIAO Q, HOU W, LIAO K, et al. Solid-phase sintering and vapor–liquid–solid growth of BP@MgO quantum dot crystals with a high piezoelectric response. Journal of Advanced Ceramics, 2022, 11(11): 1725-1734.
Keywords: quantum dots (QDs), piezoelectric, black phosphorus (BP)
-
GAO J, WANG K, LUO W, et al. Realizing translucency in aluminosilicate glass at ultralow temperature via cold sintering process. Journal of Advanced Ceramics, 2022, 11(11): 1714-1724.
Keywords: glass, cold sintering process (CSP), optical properties, mechanical properties
-
QU C, CHEN L, LV L, et al. Low thermal conductivity and anisotropic thermal expansion of ferroelastic (Gd1-xYx)TaO4 ceramics. Journal of Advanced Ceramics, 2022, 11(11): 1696-1713.
Keywords: thermal barrier coatings (TBCs), thermal conductivity, high-temperature phase stability, high-temperature X-ray diffraction (XRD), anisotropic thermal expansion
-
YAO B, LI S, ZHANG W, et al. Self-healing behavior of Ti2AlC at a low oxygen partial pressure. Journal of Advanced Ceramics, 2022, 11(11): 1687-1695.
Keywords: MAX ceramics, self-healing, low oxygen partial pressures, strength recovery, mechanism
-
QIN Y, XIONG T, ZHU J-f, et al. Realizing high thermoelectric performance of Cu and Ce co-doped p-type polycrystalline SnSe via inducing nanoprecipitation arrays. Journal of Advanced Ceramics, 2022, 11(11): 1671-1686.
Keywords: polycrystalline stannous selenide (SnSe), Cu and Ce co-doping, nanoprecipitation, ultralow thermal conductivity, thermoelectric (TE) performance
-
WU J, MA X, HU X, et al. New class of high-entropy pseudobrookite titanate with excellent thermal stability, low thermal expansion coefficient, and low thermal conductivity. Journal of Advanced Ceramics, 2022, 11(10): 1654-1670.
Keywords: high-entropy pseudobrookite, (Mg,Co,Ni,Zn)Ti2O5, (Cr,Mn,Fe,Al,Ga)2TiO5, high conformational entropy, thermal expansion coefficient, thermal conductivity
-
HE T, CAO Z, LI G, et al. High efficiently harvesting visible light and vibration energy in (1-x)AgNbO3–xLiTaO3 solid solution around antiferroelectric–ferroelectric phase boundary for dye degradation. Journal of Advanced Ceramics, 2022, 11(10): 1641-1653.
Keywords: piezoelectric effect, photocatalysis, visible light, decomposition
-
NI N, ZHANG H, ZHOU Y. Electronic structure, bonding characteristics, and mechanical behaviors of a new family of Si-containing damage-tolerant MAB phases M5SiB2 (M = IVB–VIB transition metals). Journal of Advanced Ceramics, 2022, 11(10): 1626-1640.
Keywords: borides, MAB phases, density functional theory (DFT), thermodynamic stability, electronic structure, mechanical properties
-
ZHANG Y, ZHAO L, YE Z, et al. Sol–gel approach to low-temperature synthesis of single-phase metastable La2Ga3O7.5 melilite with enhanced grain-boundary oxide ionic conductivity via a kinetically favorable mechanism. Journal of Advanced Ceramics, 2022, 11(10): 1613-1625.
Keywords: melilite, low temperature synthesis, gel-precursor, meta-stability, kinetic mechanism
-
ZHENG S, PENG K, XIAO S, et al. Planar Zintl-phase high-temperature thermoelectric materials XCuSb (X = Ca, Sr, Ba) with low lattice thermal conductivity. Journal of Advanced Ceramics, 2022, 11(10): 1604-1612.
Keywords: Zintl-phase, thermoelectric materials, honeycomb lattice, intrinsic low κL
-
LIU Y, CHU K, ZHOU Y, et al. Discovery of orthorhombic perovskite oxides with low thermal conductivity by first-principles calculations. Journal of Advanced Ceramics, 2022, 11(10): 1596-1603.
Keywords: first-principles calculations, perovskite oxide, thermal conductivity, mechanical property
-
LI H, LI C, JIA H, et al. Facile fabrication of cordierite-based porous ceramics with magnetic properties. Journal of Advanced Ceramics, 2022, 11(10): 1583-1595.
Keywords: porous cordierite ceramics, phase composition, microstructure, magnetic property
-
WANG K, ZHU J, WANG H, et al. Air plasma-sprayed high-entropy (Y0.2Yb0.2Lu0.2Eu0.2Er0.2)3Al5O12 coating with high thermal protection performance. Journal of Advanced Ceramics, 2022, 11(10): 1571-1582.
Keywords: high-entropy ceramics, thermal protection coating (TPC), air plasma spraying, thermal protection performance
-
XU J, ZHANG C. Oxygen vacancy engineering on cerium oxide nanowires for room-temperature linalool detection in rice aging. Journal of Advanced Ceramics, 2022, 11(10): 1559-1570.
Keywords: cerium oxide (CeO2), nanowire, oxygen vacancy, linalool, gas sensor
-
ZHOU X, YANG H, XUE G, et al. Optimized strain performance in <001>-textured Bi0.5Na0.5TiO3-based ceramics with ergodic relaxor state and core–shell microstructure. Journal of Advanced Ceramics, 2022, 11(10): 1542-1558.
Keywords: Bi0.5Na0.5TiO3 (BNT)-based ceramics, ergodic relaxor (ER) state, <001>, crystallographic texture, core–shell structure, optimized strain performance
-
ZHANG C, HU X, NIE Z, et al. High-performance Ta-doped Li7La3Zr2O12 garnet oxides with AlN additive. Journal of Advanced Ceramics, 2022, 11(10): 1530-1541.
Keywords: solid-state lithium-metal battery (SSLMB), garnet oxide, thermal conductivity, electronic conductivity, critical current density (CCD)
-
GONG Y, LI H, LI C, et al. Insight into rare-earth-incorporated catalysts: The chance for a more efficient ammonia synthesis. Journal of Advanced Ceramics, 2022, 11(10): 1499-1529.
Keywords: ammonia synthesis, rare earth (RE), heterogeneous catalysis, mild conditions
-
LIU Y, WANG C, LUO W, et al. Facile synthesis of hollow Ti3AlC2 microrods in molten salts via Kirkendall effect. Journal of Advanced Ceramics, 2022, 11(9): 1491-1497.
Keywords: molten salt synthesis (MSS), hollow structure, Kirkendall effect
-
PIANASSOLA M, ANDERSON KL, SAFIN J, et al. Tuning the melting point and phase stability of rare-earth oxides to facilitate their crystal growth from the melt. Journal of Advanced Ceramics, 2022, 11(9): 1479-1490.
Keywords: high-entropy oxides, crystallography, neutron diffraction, crystal growth
-
HU F, ZHANG F, WANG X, et al. Ultrabroad band microwave absorption from hierarchical MoO3/TiO2/Mo2TiC2Tx hybrids via annealing treatment. Journal of Advanced Ceramics, 2022, 11(9): 1466-1478.
Keywords: Mo2TiC2Tx MXene, electromagnetic wave absorption (EMA), impedance matching, interfacial polarization, dielectric loss
-
YANG Q, WANG X, BAO W, et al. Influence of equiatomic Zr/(Ti,Nb) substitution on microstructure and ultra-high strength of (Ti,Zr,Nb)C medium-entropy ceramics at 1900 ℃. Journal of Advanced Ceramics, 2022, 11(9): 1457-1465.
Keywords: medium entropy, mechanical property, ultra-high temperature ceramics (UHTCs), non-equimolar compositions, curved and serrated grain boundaries
-
HAN Y, ZONG P-a, HUANG M, et al. In-situ synthesis of gadolinium niobate quasi-binary composites with balanced mechanical and thermal properties for thermal barrier coatings. Journal of Advanced Ceramics, 2022, 11(9): 1445-1456
Keywords: thermal barrier coating (TBC), fracture toughness, thermal conductivity, residual stress
-
JIN S, JING H, WANG L, et al. Construction and performance of CdS/MoO2@Mo2C-MXene photocatalyst for H2 production. Journal of Advanced Ceramics, 2022, 11(9): 1431-1444.
Keywords: CdS, photocatalysis
-
LIU B, SUN J, ZHOU L, et al. Microstructure evolution and growth mechanism of core–shell silicon-based nanowires by thermal evaporation of SiO. Journal of Advanced Ceramics, 2022, 11(9): 1417-1430.
Keywords: SiC@SiO2 nanowires, Si@SiO2 nanowires, carbon/carbon (C/C) composites, growth mechanism, thermal evaporation
-
GAO S, GUAN H, WANG H, et al. Creation of SnxNb1-xO2 solid solution through heavy Nb-doping in SnO2 to boost its photocatalytic CO2 reduction to C2+ products under simulated solar illumination. Journal of Advanced Ceramics, 2022, 11(9): 1404-1416.
Keywords: photocatalytic CO2 reduction, heavy Nb-doping, tin oxide, solid solution
-
CHEN S-n, FAN H, SU Y, et al. Bioinspired PcBN/hBN fibrous monolithic ceramic: High-temperature crack resistance responses and self-lubricating performances. Journal of Advanced Ceramics, 2022, 11(9): 1391-1403.
Keywords: self-lubricating composite ceramic, bioinspired structure, resistance curve (R-curve), high-temperature property, friction and wear
-
KANG Y, LI S, TIAN R, et al. Fine-grained phosphors for red-emitting mini-LEDs with high efficiency and super-luminance. Journal of Advanced Ceramics, 2022, 11(9): 1383-1390.
Keywords: Sr2Si5N8:Eu2+-based phosphors, particle size, external quantum efficiency (EQE), thermal degradation, mini-LED
-
WU X, ZHAO J, SHIMAI S, et al. Re-fluidising the aged gel for high-density alumina green body. Journal of Advanced Ceramics, 2022, 11(9): 1375-1382.
Keywords: high density, green body, re-fluidising, alumina, colloid formation
-
SONG C, YE F, CHENG L, et al. Long-term ceramic matrix composite for aeroengine. Journal of Advanced Ceramics, 2022, 11(9): 1343-1374.
Keywords: high degree of densification, matrix cracking stress, self-healing, duration, silicon carbide ceramic matrix composite (CMC-SiC)
-
XIONG D, RASAKI SA, LI Y, et al. Enhanced cathodic activity by tantalum inclusion at B-site of La0.6Sr0.4Co0.4Fe0.6O3 based on structural property tailored via camphor-assisted solid-state reaction. Journal of Advanced Ceramics, 2022, 11(8): 1330-1342.
Keywords: tantalum-doped lanthanum strontium cobalt ferrite (LSCF), solid oxide fuel cell (SOFC), oxygen reduction reaction (ORR), solid-state synthesis reaction, clean energy conversion
-
CAI Y, LIU S, ZHAO L, et al. Delayed stress memory by CaAl2O4:Eu2+ mechanoluminescent phosphor with defect engineering regulation. Journal of Advanced Ceramics, 2022, 11(8): 1319-1329.
Keywords: delayed stress memory, mechanoluminescent film, stress information, defect engineering, closed mechanical structure
-
DUAN X, FANG Z, YANG T, et al. Maximizing the mechanical performance of Ti3AlC2-based MAX phases with aid of machine learning. Journal of Advanced Ceramics, 2022, 11(8): 1307-1318.
Keywords: Ti3(Al1-xAx)C2, crystal graph convolution neural network (CGCNN) model, stability, mechanical properties
-
ZHANG L, HU Z, HUANG J, et al. Experimental and DFT studies of flower-like Ni-doped Mo2C on carbon fiber paper: A highly efficient and robust HER electrocatalyst modulated by Ni(NO3)2 concentration. Journal of Advanced Ceramics, 2022, 11(8): 1294-1306
Keywords: Mo2C@CFP electrocatalyst, nickel (Ni) doping, hydrogen evolution reaction (HER), water splitting, molten salt method
-
CHEN Z, TIAN Z, ZHENG L, et al. (Ho0.25Lu0.25Yb0.25Eu0.25)2SiO5 high-entropy ceramic with low thermal conductivity, tunable thermal expansion coefficient, and excellent resistance to CMAS corrosion. Journal of Advanced Ceramics, 2022, 11(8): 1279-1293.
Keywords: high-entropy ceramic, environmental barrier coating (EBC), rare earth silicate, thermal conductivity, thermal expansion coefficient (TEC)
-
WANG X, YANG Y, JIA S, et al. In-situ synthesis, microstructure, and properties of NbB2-NbC-Al2O3 composite coatings by plasma spraying. Journal of Advanced Ceramics, 2022, 11(8): 1263-1278.
Keywords: plasma spray, in-situ synthesis, Nb2O5-B4C-Al system
-
DAI R, CHENG R, WANG J, et al. Tunnel-structured willemite Zn2SiO4: Electronic structure, elastic, and thermal properties. Journal of Advanced Ceramics, 2022, 11(8): 1249-1262.
Keywords: electronic structure, elastic properties, thermal expansion, thermal conductivity
-
SONG L, FAN B, CHEN Y, et al. Ultralight and hyperelastic SiC nanofiber aerogel spring for personal thermal energy regulation. Journal of Advanced Ceramics, 2022, 11(8): 1235-1248.
Keywords: SiC nanofiber aerogel spring (SiC NFAS), mechanical property, thermal insulation, personal thermal energy regulation
-
ZHU J, WEI M, XU J, et al. Influence of order-disorder transition on the mechanical and thermophysical properties of A2B2O7 high-entropy ceramics. Journal of Advanced Ceramics, 2022, 11(8): 1222-1234.
Keywords: high-entropy ceramics, order-disorder transition (ODT), mechanical properties, thermal conductivity
-
WANG F, DONG B, WANG J, et al. Self-supported porous heterostructure WC/WO3-x ceramic electrode for hydrogen evolution reaction in acidic and alkaline media. Journal of Advanced Ceramics, 2022, 11(8): 1208-1221
Keywords: hydrogen evolution reaction (HER), porous ceramic membrane, heterostructure, self-supported electrode, oxygen vacancies
-
YU T, XU J, ZHOU X, et al. Near-seamless joining of Cf/SiC composites using Y3Si2C2 via electric field-assisted sintering technique. Journal of Advanced Ceramics, 2022, 11(8): 1196-1207.
Keywords: electric field-assisted sintering technique (FAST)
-
ZHANG D, FANG Z, WANG L, et al. Controllable growth of single-crystalline zinc oxide nanosheets under ambient condition toward ammonia sensing with ultrahigh selectivity and sensitivity. Journal of Advanced Ceramics, 2022, 11(8): 1187-1195.
Keywords: zinc oxide (ZnO), nanostructures, ambient condition, crystal growth, gas sensor
-
CHEN Y, QI J, ZHANG M, et al. Pyrochlore-based high-entropy ceramics for capacitive energy storage. Journal of Advanced Ceramics, 2022, 11(7): 1179-1185.
Keywords: high entropy, bismuth-based pyrochlore, high-temperature stability, energy storage
-
WU A, YAN Z, WANG X, et al. A versatile defect engineering strategy for room-temperature flash sintering. Journal of Advanced Ceramics, 2022, 11(7): 1172-1178.
Keywords: flash sintering (FS), oxygen vacancies, defect engineering, ZnO powders, electric discharge
-
LIU F, ZHAO Z, MA Y, et al. Robust Joule-heating ceramic reactors for catalytic CO oxidation. Journal of Advanced Ceramics, 2022, 11(7): 1163-1171.
Keywords: Joule heating, ceramic reactor, microchannel reactor, temperature control, CO oxidation
-
CHEN P, LI X, TIAN F, et al. Fabrication, microstructure, and properties of 8 mol% yttria-stabilized zirconia (8YSZ) transparent ceramics. Journal of Advanced Ceramics, 2022, 11(7): 1153-1162.
Keywords: yttria-stabilized zirconia (8YSZ) transparent ceramics, hot isostatic pressing (HIP), microstructure, optical transparency, mechanical properties
-
YU Z, WANG X, LIU C, et al. Carrier and microstructure tuning for improving the thermoelectric properties of Ag8SnSe6 via introducing SnBr2. Journal of Advanced Ceramics, 2022, 11(7): 1144-1152.
Keywords: thermoelectric (TE) performance, lattice thermal conductivity, SnBr2 introduction, hydrothermal method
-
ZVONAREVA IA, MINEEV AМ, TARASOVA NA, et al. High-temperature transport properties of BaSn1-xScxO3-δ ceramic materials as promising electrolytes for protonic ceramic fuel cells. Journal of Advanced Ceramics, 2022, 11(7): 1131-1143.
Keywords: BaSnO3, protonic ceramic fuel cells (PCFCs), proton transport, perovskite, hydration, electronic conductivity
-
TAO J, WANG M, LIU G, et al. Efficient photocatalytic hydrogen evolution coupled with benzaldehyde production over 0D Cd0.5Zn0.5S/2D Ti3C2 Schottky heterojunction. Journal of Advanced Ceramics, 2022, 11(7): 1117-1130.
Keywords: photocatalysis, hydrogen, benzaldehyde, Schottky heterojunction
-
ZHAN Y, LI W, JIANG T, et al. Boron-modified perhydropolysilazane towards facile synthesis of amorphous SiBN ceramic with excellent thermal stability. Journal of Advanced Ceramics, 2022, 11(7): 1104-1116.
Keywords: polymer-derived ceramics (PDCs), SiBN, crystallization, molecular dynamics, oxidation resistance
-
ZHANG X, LI M, ZHANG A, et al. Al-modification for PS-PVD 7YSZ TBCs to improve particle erosion and thermal cycle performances. Journal of Advanced Ceramics, 2022, 11(7): 1093-1103.
Keywords: plasma spray-physical vapor deposition (PS-PVD), thermal barrier coatings (TBCs), Al-modification, particle erosion resistance, thermal cycle performance
-
QIN Y, LIU J-X, LIANG Y, et al. Equiatomic 9-cation high-entropy carbide ceramics of the IVB, VB, and VIB groups and thermodynamic analysis of the sintering process. Journal of Advanced Ceramics, 2022, 11(7): 1082-1092.
Keywords: high-entropy (HE) carbide, oxygen impurity, carbothermal reduction reaction, phase composition, thermodynamic analysis
-
MANI AD, LI J, WANG Z, et al. Coupling of piezocatalysis and photocatalysis for efficient degradation of methylene blue by Bi0.9Gd0.07La0.03FeO3 nanotubes. Journal of Advanced Ceramics, 2022, 11(7): 1069-1081.
Keywords: photocatalysis, piezocatalysis, sonophotocatalysis, oxygen vacancy (OV)
-
WEI Z-Y, MENG G-H, CHEN L, et al. Progress in ceramic materials and structure design toward advanced thermal barrier coatings. Journal of Advanced Ceramics, 2022, 11(7): 985-1068.
Keywords: thermal barrier coatings (TBCs), ceramic material, degradation and failure, structure design, long lifetime
-
ZHAO J, LEI L, YE R, et al. Sunlight activated ultra-stable long persistent luminescence glass ceramic for outdoor information display. Journal of Advanced Ceramics, 2022, 11(6): 974-983.
Keywords: solar energy, persistent luminescence (PeL), glass ceramic, optical information display, stability
-
LIU D, SHI B, GENG L, et al. High-entropy rare-earth zirconate ceramics with low thermal conductivity for advanced thermal-barrier coatings. Journal of Advanced Ceramics, 2022, 11(6): 961-973.
Keywords: high-entropy rare-earth zirconates (HE-REZs), first-principles calculations, thermal conductivity, thermal stability, Young’s modulus, thermal-barrier coatings (TBCs)
-
GUO L, LI G, WU J, et al. Effects of pellet surface roughness and pre-oxidation temperature on CMAS corrosion behavior of Ti2AlC. Journal of Advanced Ceramics, 2022, 11(6): 945-960.
Keywords: thermal barrier coatings (TBCs), pre-oxidation temperature, calcium-magnesium-alumina-silicate (CMAS) corrosion, thermal cycling
-
HUAN Y, WANG X, YANG W, et al. Optimizing energy harvesting performance by tailoring ferroelectric/relaxor behavior in KNN-based piezoceramics. Journal of Advanced Ceramics, 2022, 11(6): 935-944.
Keywords: piezoelectric energy harvesters (PEHs), potassium sodium niobate (KNN), relaxor ferroelectric, miniaturized domains, multiphase coexistence
-
LIU W, XIE Y, DENG Z, et al. Modification of YSZ fiber composites by Al2TiO5 fibers for high thermal shock resistance. Journal of Advanced Ceramics, 2022, 11(6): 922-934.
Keywords: YSZ-Al2TiO5 fiber composites, thermal expansion, thermal shock resistance, thermal insulating
-
FAN X, BAI G, ZHANG Z, et al. Synergistic effect of V2O5 and Bi2O5 on the grain boundary structure of high-frequency NiCuZn ferrite ceramics. Journal of Advanced Ceramics, 2022, 11(6): 912-921.
Keywords: NiCuZn ferrite, megahertz application, grain boundary, Bi2Fe4O9, ion doping
-
YANG C, HUANG J, HUANG Q, et al. Optical, thermal, and mechanical properties of (Y1-xScx)2O3 transparent ceramics. Journal of Advanced Ceramics, 2022, 11(6): 901-911.
Keywords: Y2O3, Sc2O3, solid solution transparent ceramics, thermal conductivity, mechanical properties
-
HE H, ZHAO R, TIAN H, et al. Sintering behavior of alumina whisker reinforced zirconia ceramics in hot oscillatory pressing. Journal of Advanced Ceramics, 2022, 11(6): 893-900.
Keywords: hot oscillatory pressing (HOP), densification behavior, grain boundary sliding, whisker reinforced ceramic composite
-
YUAN K, TU T, SHEN C, et al. Self-ball milling strategy to construct high-entropy oxide coated LiNi0.8Co0.1Mn0.1O2 with enhanced electrochemical performance. Journal of Advanced Ceramics, 2022, 11(6): 882-892.
Keywords: high-entropy oxides (HEOs), Li-ion battery (LIB), Ni-rich cathode, coating modification
-
LI Q, WANG Y, WANG J, et al. High transparency Pr:Y2O3 ceramics: A promising gain medium for red emission solid-state lasers. Journal of Advanced Ceramics, 2022, 11(6): 874-881.
Keywords: praseodymium ions (Pr3+), valence state, defect state, optical properties
-
HUANG Q, LIN H, WANG B, et al. Patterned glass ceramic design for high-brightness high-color-quality laser-driven lightings. Journal of Advanced Ceramics, 2022, 11(6): 862-873.
Keywords: laser lightings, glass ceramics (GCs), white light, garnets, nitrides
-
JI X, ZHANG Y, CAO M, et al. Advanced inorganic/polymer hybrid electrolytes for all-solid-state lithium batteries. Journal of Advanced Ceramics, 2022, 11(6): 835-861.
Keywords: solid-state electrolytes (SSEs), hybrid electrolytes, energy density, electrical energy storage (EES), lithium batteries
-
ZHANG Q, FU S, WAN D, et al. Synthesis and property characterization of ternary laminar Zr2SB ceramic. Journal of Advanced Ceramics, 2022, 11(5): 825-833.
Keywords: spark plasma sintering (SPS), reaction path, microstructure, properties
-
YAO Y, ZHANG Y. Interior-collapsing mechanism by hydrothermal process of the MgAl2O4/MgO porous ceramic. Journal of Advanced Ceramics, 2022, 11(5): 814-824.
Keywords: ceramic cores, porous structure, MgO, hydration, interior-collapsing mechanism
-
LUO S-C, GUO W-M, PLUCKNETT K, et al. Low-temperature densification of high-entropy (Ti,Zr,Nb,Ta,Mo)C–Co composites with high hardness and high toughness. Journal of Advanced Ceramics, 2022, 11(5): 805-813
Keywords: high-entropy carbide ceramics, liquid-phase sintering, microstructure, grain size, mechanical properties
-
XU Y, XU X, BI L. A high-entropy spinel ceramic oxide as the cathode for proton-conducting solid oxide fuel cells. Journal of Advanced Ceramics, 2022, 11(5): 794-804.
Keywords: proton-conducting oxides, high-entropy oxides, cathode, solid oxide fuel cells (SOFCs)
-
ZHANG L, LI X, HU D, et al. Fabrication and properties of non-stoichiometric Tb2(Hf1-xTbx)2O7-x magneto-optical ceramics. Journal of Advanced Ceramics, 2022, 11(5): 784-793.
Keywords: magneto-optical ceramics, reactive sintering, Verdet constant
-
LEE J, CHOI Y, PARK BJ, et al. Precise control of surface oxygen vacancies in ZnO nanoparticles for extremely high acetone sensing response. Journal of Advanced Ceramics, 2022, 11(5): 769-783.
Keywords: gas sensors, acetone, metal oxide semiconductors (MOSs), ZnO nanoparticles (NPs), H2O2 treatment
-
MA J, ZHAO B, XIANG H, et al. High-entropy spinel ferrites MFe2O4 (M = Mg, Mn, Fe, Co, Ni, Cu, Zn) with tunable electromagnetic properties and strong microwave absorption. Journal of Advanced Ceramics, 2022, 11(5): 754-768.
Keywords: high-entropy ceramics (HECs), spinel-type ferrite, electromagnetic (EM) wave absorption, dielectric loss, magnetic loss
-
GUO M, LIU Y, ZHANG F, et al. Inactive Al3+-doped La(CoCrFeMnNiAlx)1/(5+x)O3 high-entropy perovskite oxides as high performance supercapacitor electrodes. Journal of Advanced Ceramics, 2022, 11(5): 742-753.
Keywords: high-entropy oxides (HEOxs), perovskite structure, Al3+-doping, supercapacitors
-
DONG X, LI X, CHEN H, et al. Realizing enhanced energy storage and hardness performances in 0.90NaNbO3–0.10Bi(Zn0.5Sn0.5)O3 ceramics. Journal of Advanced Ceramics, 2022, 11(5): 729-741.
Keywords: energy storage, NaNbO3 (NN)-based, domain evolutions, hardness
-
YANG K, WANG Y, SHEN J, et al. Cs3Bi2I9–hydroxyapatite composite waste forms for cesium and iodine immobilization. Journal of Advanced Ceramics, 2022, 11(5): 712-728.
Keywords: cesium (Cs), iodine (I), perovskite, nuclear waste, hydroxyapatite
-
LV X, YUE M, FENG X, et al. Rare earth monosilicates as oxidation resistant interphase for SiCf/SiC CMC: Investigation of SiCf/Yb2SiO5 model composites. Journal of Advanced Ceramics, 2022, 11(5): 702-711.
Keywords: silicon carbide fiber reinforced silicon carbide ceramic matrix composite (SiCf/SiC CMC), interphase, rare earth (RE) silicates, interfacial parameters
-
WEI X, JIN M-L, YANG H, et al. Advances in 3D printing of magnetic materials: Fabrication, properties, and their applications. Journal of Advanced Ceramics, 2022, 11(5): 665-701.
Keywords: three-dimensional (3D) printing, hard magnets, soft magnets, magnetic properties
-
XU S, ZHOU X, ZHI Q, et al. Anisotropic, biomorphic cellular Si3N4 ceramics with directional well-aligned nanowhisker arrays based on wood-mimetic architectures. Journal of Advanced Ceramics, 2022, 11(4): 656-664.
Keywords: silicon nitride, anisotropic, carbothermal reduction nitridation (CRN), wood, nanowhisker arrays
-
QIN M, VEGA H, ZHANG D, et al. 21-Component compositionally complex ceramics: Discovery of ultrahigh-entropy weberite and fergusonite phases and a pyrochlore-weberite transition. Journal of Advanced Ceramics, 2022, 11(4): 641-655
Keywords: compositionally complex ceramics, high-entropy ceramics (HECs), weberite, pyrochlore, fergusonite, ultrahigh-entropy ceramics, many-component ceramics
-
GUO W, MA Z, LUO Y, et al. Structure, defects, and microwave dielectric properties of Al-doped and Al/Nd co-doped Ba4Nd9.33Ti18O54 ceramics. Journal of Advanced Ceramics, 2022, 11(4): 629-640.
Keywords: microwave dielectric ceramics, BNT, Al and Al/Nd doping, structural and defect modulation
-
XUE Y, ZHAO X, AN Y, et al. High-entropy (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Ce2O7: A potential thermal barrier material with improved thermo-physical properties. Journal of Advanced Ceramics, 2022, 11(4): 615-628.
Keywords: high-entropy oxides (HEOs), defective fluorite structure, thermal expansion coefficient (TEC), thermal conductivity, thermal barrier coating (TBC)
-
ZHU Y, ZHOU H, HUANG R, et al. Gas-discharge induced flash sintering of YSZ ceramics at room temperature. Journal of Advanced Ceramics, 2022, 11(4): 603-614.
Keywords: flash sintering, yttria-stabilized zirconia (YSZ), room temperature, flashover, AC field, low atmospheric pressure
-
HONG D, YIN Z, GUO F, et al. Microwave synthesis of duplex α/β-SiAlON ceramic cutting inserts: Modifying m, n, z values, synthesis temperature, and excess Y2O3 synthesis additive. Journal of Advanced Ceramics, 2022, 11(4): 589-602.
Keywords: α/β-SiAlON, microwave, ceramic cutting insert, solid solution parameter, Y2O3 synthesis additive
-
CHEN H, ZHAO J, SHIMAI S, et al. High transmittance and grain-orientated alumina ceramics fabricated by adding fine template particles. Journal of Advanced Ceramics, 2022, 11(4): 582-588.
Keywords: templated grain growth (TGG), orientation, transparent alumina
-
PAN M-Z, HUA S-B, WU J-M, et al. Preparation and properties of T-ZnOw enhanced BCP scaffolds with double-layer structure by digital light processing. Journal of Advanced Ceramics, 2022, 11(4): 570-581.
Keywords: biphasic calcium phosphate (BCP), T-ZnOw, digital light processing (DLP), double-layer structure, cure property, mechanical strength
-
CHEN L, LI B, GUO J, et al. High-entropy perovskite RETa3O9 ceramics for high-temperature environmental/thermal barrier coatings. Journal of Advanced Ceramics, 2022, 11(4): 556-569.
Keywords: high-entropy ceramics (HECs), tantalates, thermal conductivity, nanoindentation, fracture toughness
-
ZHANG W, XIANG H, DAI F-Z, et al. Achieving ultra-broadband electromagnetic wave absorption in high-entropy transition metal carbides (HE TMCs). Journal of Advanced Ceramics, 2022, 11(4): 545-555.
Keywords: transition metal carbide (TMC), high-entropy ceramics, electromagnetic (EM) wave absorption, dielectric and magnetic loss coupling, ultra-broadband absorption
-
ZHANG Z, DUAN X, TIAN Z, et al. Texture and anisotropy of hot-pressed h-BN matrix composite ceramics with in situ formed YAG. Journal of Advanced Ceramics, 2022, 11(4): 532-544.
Keywords: hexagonal boron nitride (h-BN), liquid phase sintering, texture, anisotropy
-
FUNAHASHI Y, XIN Y, KATO K, et al. Enhanced electrical property of graphite/Al2O3 composite fabricated by reductive sintering of gel-casted body using cross-linked epoxy polymer. Journal of Advanced Ceramics, 2022, 11(4): 523-531.
Keywords: ceramic composite, gel-casting, reductive sintering, cross-linking, electrical property, graphitization
-
XU H, WANG B, QI J, et al. Modulation of spin dynamics in Ni/Pb(Mg1/3Nb2/3)O3-PbTiO3 multiferroic heterostructure. Journal of Advanced Ceramics, 2022, 11(3): 515-521.
Keywords: spin dynamics, multiferroic heterostructure, non-volatile, magnetic anisotropy, spin wave switch
-
CAO Q, ZHANG J, ZHANG H, et al. Dual-surfactant templated hydrothermal synthesis of CoSe2 hierarchical microclews for dielectric microwave absorption. Journal of Advanced Ceramics, 2022, 11(3): 504-514.
Keywords: hierarchical structure, cobalt diselenide, surfactant, assembly, microwave absorption
-
ZHANG W, LI S, WU S, et al. Synthesis and properties of MoAlB composites reinforced with SiC particles. Journal of Advanced Ceramics, 2022, 11(3): 495-503.
Keywords: SiC/MoAlB composite, mechanical properties, oxidation, microstructure
-
QU Z, YU C, WEI Y, et al. Thermal conductivity of boron carbide under fast neutron irradiation. Journal of Advanced Ceramics, 2022, 11(3): 482-494.
Keywords: boron carbide (B4C), thermal conductivity, fast neutron irradiation
-
ZHANG G, GOLDSTEIN A, WU Y. Novel transparent MgGa2O4 and Ni2+-doped MgGa2O4 ceramics. Journal of Advanced Ceramics, 2022, 11(3): 470-481
Keywords: magnesium gallate, spinel, transparent ceramics, pulsed electric current sintering (PECS)
-
GUO L, LI B, CHENG Y, et al. Composition optimization, high-temperature stability, and thermal cycling performance of Sc-doped Gd2Zr2O7 thermal barrier coatings: Theoretical and experimental studies. Journal of Advanced Ceramics, 2022, 11(3): 454-469
Keywords: thermal barrier coating (TBC), first-principles calculation, solid solution mechanism, high-temperature stability, thermal cycling
-
MALESEVIC A, RADOJKOVIC A, ZUNIC M, et al. Evaluation of stability and functionality of BaCe1-xInxO3-δ electrolyte in a wider range of indium concentration. Journal of Advanced Ceramics, 2022, 11(3): 443-453.
Keywords: ionic conductivity, perovskite, fuel cell, BaCeO3
-
ZHANG Y, HAN S, WANG M, et al. Electrospun Cu-doped In2O3 hollow nanofibers with enhanced H2S gas sensing performance. Journal of Advanced Ceramics, 2022, 11(3): 427-442.
Keywords: electrospinning, Cu-doped In2O3, hollow nanofibers, H2S detection
-
YU C, TAN M, TAO C, et al. Remarkably enhanced piezo-photocatalytic performance in BaTiO3/CuO heterostructures for organic pollutant degradation. Journal of Advanced Ceramics, 2022, 11(3): 414-426.
Keywords: piezotronics, photocatalysis, polarization, heterostructure
-
ZHANG X, XIE W, SUN L, et al. Continuous SiC skeleton reinforced highly oriented graphite flake composites with high strength and specific thermal conductivity. Journal of Advanced Ceramics, 2022, 11(3): 403-413.
Keywords: ceramics, composite materials, high orientation, flexural strength, heat conduction
-
FENG C, ZHOU X, TAO B, et al. Crystal structure and enhanced microwave dielectric properties of the Ce2[Zr1-x(Al1/2Ta1/2)x]3(MoO4)9 ceramics at microwave frequency. Journal of Advanced Ceramics, 2022, 11(3): 392-402.
Keywords: microwave dielectric ceramics, CZMAT, Phillips-Van Vechten-Levine (P-V-L) theory, low sintering temperature
-
ZHANG C, HUAN Y, LI Y, et al. Low concentration isopropanol gas sensing properties of Ag nanoparticles decorated In2O3 hollow spheres. Journal of Advanced Ceramics, 2022, 11(3): 379-391.
Keywords: Ag-In2O3, hollow spheres, isopropanol, gas sensor
-
YANG L, XIAO X, LIU L, et al. Dynamic oxidation mechanism of carbon fiber reinforced SiC matrix composite in high-enthalpy and high-speed plasmas. Journal of Advanced Ceramics, 2022, 11(2): 365-377.
Keywords: thermal protection system (TPS), ceramic matrix composite, oxidation mechanism, plasma wind tunnel, mechanical property
-
DANG X, ZHAO D, GUO T, et al. Oxidation behaviors of carbon fiber reinforced multilayer SiC-Si3N matrix composites. Journal of Advanced Ceramics, 2022, 11(2): 354-364.
Keywords: carbon fiber reinforced SiC matrix composites (C/SiC), elastic modulus mismatch, coefficient of thermal expansion (CTE) mismatch, oxidation resistance
-
DAI M, SONG X, LIN C, et al. Investigation of microstructure changes in Al2O3-YSZ coatings and YSZ coatings and their effect on thermal cycle life. Journal of Advanced Ceramics, 2022, 11(2): 345-353.
Keywords: thermal barrier coatings (TBCs), thermal cycling, microstructure change, microscopic strain, failure mechanism
-
DU X, ZHOU Z, ZHANG Z, et al. Porous, multi-layered piezoelectric composites based on highly oriented PZT/PVDF electrospinning fibers for high-performance piezoelectric nanogenerators. Journal of Advanced Ceramics, 2022, 11(2): 331-344.
Keywords: piezoelectric composite, piezoelectric nanogenerator (PENG), porous structure, Pb(Zr0.52Ti0.48)O3 (PZT), PZT/PVDF electrospinning fibers, flexible self-powered devices
-
CHEN S, FAN H, SU Y, et al. Influence of binder systems on sintering characteristics, microstructures, and mechanical properties of PcBN composites fabricated by SPS. Journal of Advanced Ceramics, 2022, 11(2): 321-330.
Keywords: polycrystalline cubic boron nitride (PcBN), binder system, sintering characteristic, high temperature mechanical property, fracture mechanism
-
WU J, LI L, LI X-a, et al. A novel 2D graphene oxide modified α-AgVO3 nanorods: Design, fabrication, and enhanced visible-light photocatalytic performance. Journal of Advanced Ceramics, 2022, 11(2): 308-320.
Keywords: graphene oxide modified α-AgVO3 nanorods (GO/α-AgVO3), photocatalysis, graphene oxide (GO) nanosheets, in-situ coprecipitation processing
-
LIU C, QIU Y, LIU Y, et al. Novel 3D grid porous Li4Ti4O12 thick electrodes fabricated by 3D printing for high performance lithium-ion batteries. Journal of Advanced Ceramics, 2022, 11(2): 295-307.
Keywords: three-dimensional (3D) porous thick electrodes, Li4Ti5O12 (LTO), 3D printing, lithium-ion (Li-ion) battery
-
LI Z, LI D-X, SHEN Z-Y, et al. Remarkably enhanced dielectric stability and energy storage properties in BNT-BST relaxor ceramics by A-site defect engineering for pulsed power applications. Journal of Advanced Ceramics, 2022, 11(2): 283-294
Keywords: relaxor ferroelectrics, energy storage ceramics, ceramic capacitor, Bi0.5Na0.5TiO3 (BNT), defect engineering
-
QI X, YIN W, JIN S, et al. Density-functional-theory predictions of mechanical behaviour and thermal properties as well as experimental hardness of the Ga-bilayer Mo2Ga2C. Journal of Advanced Ceramics, 2022, 11(2): 273-282.
Keywords: MAX phase, first-principles, damage tolerance, heat capacity, thermal expansion
-
LI J, HONG Y, HE S, et al. A neutron diffraction investigation of high valent doped barium ferrite with wideband tunable microwave absorption. Journal of Advanced Ceramics, 2022, 11(2): 263-272.
Keywords: barium ferrite, neutron diffraction, microwave absorption
-
CAO L, LIU Y, ZHANG Y, et al. Thermal conductivity and bending strength of SiC composites reinforced by pitch-based carbon fibers. Journal of Advanced Ceramics, 2022, 11(2): 247-262.
Keywords: pitch-based carbon fiber, continuous carbon fiber reinforced silicon carbide matrix composites (C/SiC), thermal conductivity, bending strength
-
WEN Q, QU F, YU Z, et al. Si-based polymer-derived ceramics for energy conversion and storage. Journal of Advanced Ceramics, 2022, 11(2): 197-246.
Keywords: polymer-derived ceramics (PDCs), high-temperature resistance, structural properties, electrochemical properties, microstructure
-
WANG X, HUAN Y, ZHU Y, et al. Defect engineering of BCZT-based piezoelectric ceramics with high piezoelectric properties. Journal of Advanced Ceramics, 2022, 11(1): 184-195.
Keywords: BCZT ceramics, Mn-doping, different sintering atmosphere, p/n-type conduction mechanism, defect engineering
-
CHEN S, WANG L, HE G, et al. Microstructure and properties of porous Si3N4 ceramics by gelcasting-self-propagating high-temperature synthesis (SHS). Journal of Advanced Ceramics, 2022, 11(1): 172-183.
Keywords: gelcasting, self-propagating high-temperature synthesis (SHS), porosity
-
YAN S, LUO S, YANG L, et al. Novel P2-type layered medium-entropy ceramics oxide as cathode material for sodium-ion batteries. Journal of Advanced Ceramics, 2022, 11(1): 158-171.
Keywords: cathode materials, medium-entropy oxide (MEO), configuration entropy, electrochemical performance, sodium-ion batteries (SIBs)
-
DONG L, LIU M-J, ZHANG X-F, et al. Pressure infiltration of molten aluminum for densification of environmental barrier coatings. Journal of Advanced Ceramics, 2022, 11(1): 145-157.
Keywords: infiltration process, channel pore, densification, pressure assistant, environmental barrier coating (EBC)
-
HAN Y, YU R, LIU H, et al. Synthesis of the superfine high-entropy zirconate nanopowders by polymerized complex method. Journal of Advanced Ceramics, 2022, 11(1): 136-144.
Keywords: high-entropy oxides, zirconates, nanopowders, polymerized complex method
-
LYU Y, DU B, CHEN G, et al. Microstructural regulation, oxidation resistance, and mechanical properties of Cf/SiC/SiHfBOC composites prepared by chemical vapor infiltration with precursor infiltration pyrolysis. Journal of Advanced Ceramics, 2022, 11(1): 120-135.
Keywords: precursor infiltration pyrolysis (PIP) method, mechanical properties, high-temperature oxidation resistance
-
QIN G, HUANG X, YAN X, et al. Carbonized wood with ordered channels decorated by NiCo2O4 for lightweight and high-performance microwave absorber. Journal of Advanced Ceramics, 2022, 11(1): 105-119.
Keywords: microwave absorption (MA), wood-derived carbon, ordered-channel architecture, light weight, finite element analysis (FEA)
-
CHEN X, CHENG G, YANG J, et al. Effects of interfacial residual stress on mechanical behavior of SiCf/SiC composites. Journal of Advanced Ceramics, 2022, 11(1): 94-104.
Keywords: ceramic matrix composites, Raman spectroscopy, mechanical properties, residual stress
-
ZHAO D, WU D, SHI J, et al. Microstructure and mechanical properties of melt-grown alumina-mullite/glass composites fabricated by directed laser deposition. Journal of Advanced Ceramics, 2022, 11(1): 75-93.
Keywords: laser, additive manufacturing, alumina, mullite, microstructure, mechanical properties
-
DONG Y, REN K, WANG Q, et al. Interaction of multicomponent disilicate (Yb0.2Y0.2Lu0.2Sc0.2Gd0.2)2Si2O7 with molten calcia-magnesia-aluminosilicate. Journal of Advanced Ceramics, 2022, 11(1): 66-74.
Keywords: environmental barrier coating (EBC) materials, rare-earth (RE) disilicates, multicomponent ceramics, calcia-magnesia-aluminosilicate (CMAS) interaction
-
LUO C, KARAKI T, WANG Z, et al. High piezoelectricity after field cooling AC poling in temperature stable ternary single crystals manufactured by continuous-feeding Bridgman method. Journal of Advanced Ceramics, 2022, 11(1): 57-65.
Keywords: field cooling (FC) alternating current poling (ACP), PIMN-0.30PT, high piezoelectricity
-
NI D, CHENG Y, ZHANG J, et al. Advances in ultra-high temperature ceramics, composites, and coatings. Journal of Advanced Ceramics, 2022, 11(1): 1-56.
Keywords: ultra-high temperature ceramics (UHTCs), coatings, composites, high-entropy ultra-high temperature ceramics
-
PENG R, LU Y, ZHANG Q, et al. Amelioration of sintering and multi-frequency dielectric properties of Mg3B2O6: A mechanism study of nickel substitution using DFT calculation. Journal of Advanced Ceramics, 2021, 10(6): 1398-1407.
Keywords: borate, density functional theory (DFT), low dielectric constant, dielectric properties
-
WANG Y, MA Z, LIU L, et al. Reaction products of Sm2Zr2O7 with calcium-magnesium-aluminum-silicate (CMAS) and their evolution. Journal of Advanced Ceramics, 2021, 10(6): 1389-1397.
Keywords: calcium-magnesium-aluminum-silicate (CMAS), reaction product, corrosion
-
ZHENG W, WU J-M, CHEN S, et al. Influence of Al2O3 content on mechanical properties of silica-based ceramic cores prepared by stereolithography. Journal of Advanced Ceramics, 2021, 10(6): 1381-1388.
Keywords: silica, ceramic core, stereolithography, mechanical properties, hollow blades
-
LU J, NI D, LIAO C, et al. Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration. Journal of Advanced Ceramics, 2021, 10(6): 1371-1380.
Keywords: short fiber reinforced composites, ultra-high temperature ceramics (UHTCs), interphase, orientation
-
XIONG Y, XIE H, RAO Z, et al. Compositional modulation in ZnGa2O4 via Zn2+/Ge4+ co-doping to simultaneously lower sintering temperature and improve microwave dielectric properties. Journal of Advanced Ceramics, 2021, 10(6): 1360-1370.
Keywords: spinel, composition modulation, dielectric properties
-
ZHANG F, HU H, HU S, et al. Significant strain-rate dependence of sensing behavior in TiO2@carbon fibre/PDMS composites for flexible strain sensors. Journal of Advanced Ceramics, 2021, 10(6): 1350-1359.
Keywords: composites, dependence of strain rate, sensitivity, flexible strain sensors
-
YU Z, MAO K, FENG Y. Single-source-precursor synthesis of porous W-containing SiC-based nanocomposites as hydrogen evolution reaction electrocatalysts. Journal of Advanced Ceramics, 2021, 10(6): 1338-1349.
Keywords: single-source-precursor, W-containing phase, SiC-based nanocomposites, electrocatalyst, hydrogen evolution reaction
-
LI K, RAO J, NING C. Optimized sintering and mechanical properties of Y-TZP ceramics for dental restorations by adding lithium disilicate glass ceramics. Journal of Advanced Ceramics, 2021, 10(6): 1326-1337.
Keywords: yttria stabilized tetragonal zirconia polycrystalline (Y-TZP), lithium disilicate glass ceramics (LDGC), sintering, mechanical properties, dental restoration
-
LIU Z, ZHAO S, YANG T, et al. Improvement in mechanical properties in AlN-h-BN composites with high thermal conductivity. Journal of Advanced Ceramics, 2021, 10(6): 1317-1325.
Keywords: aluminum nitride (AlN), boron nitride (BN), mechanical properties, thermal conductivity
-
ZHANG W, DAI F-Z, XIANG H, et al. Enabling highly efficient and broadband electromagnetic wave absorption by tuning impedance match in high-entropy transition metal diborides (HE TMB2). Journal of Advanced Ceramics, 2021, 10(6): 1299-1316.
Keywords: transition metal diboride (TMB2), high-entropy (HE) ceramics, electronic structure, microwave absorption, dielectric and magnetic losses coupling
-
HUANG J, WAN H, LI M, et al. In-situ growth of MAX phase coatings on carbonised wood and their terahertz shielding properties. Journal of Advanced Ceramics, 2021, 10(6): 1291-1298.
Keywords: MAX phases, biomimics, electromagnetic interference (EMI), terahertz shielding
-
WANG H, LI S, WANG K, et al. Sintering behaviour and microwave dielectric properties of MgO-2B2O3-xwt%BaCu(B2O5)-ywt%H3BO3 ceramics. Journal of Advanced Ceramics, 2021, 10(6): 1282-1290.
Keywords: low-temperature co-fired ceramics (LTCC), sintering temperature, microwave dielectrics, temperature coefficient of resonance frequency
-
ZHAO X, HU Z, WU J, et al. Vector analysis of electric-field-induced antiparallel magnetic domain evolution in ferromagnetic/ferroelectric heterostructures. Journal of Advanced Ceramics, 2021, 10(6): 1273-1281.
Keywords: multiferroics, magnetoelectric effect, magnetic domains, magneto-optical Kerr effect (MOKE)
-
LI M, CHENG L, YE F, et al. Formation of nanocrystalline graphite in polymer-derived SiCN by polymer infiltration and pyrolysis at a low temperature. Journal of Advanced Ceramics, 2021, 10(6): 1256-1272.
Keywords: polymer-derived ceramics (PDCs), silicon carbonitride (SiCN), free carbon, carbonization, dielectric property
-
BOONLAKHORN J, CHANLEK N, MANYAM J, et al. Enhanced giant dielectric properties and improved nonlinear electrical response in acceptor-donor (Al3+, Ta5+)-substituted CaCu3Ti4O12 ceramics. Journal of Advanced Ceramics, 2021, 10(6): 1243-1255.
Keywords: CaCu3Ti4O12 (CCTO), impedance spectroscopy, nonlinear electrical properties, dielectric constant, loss tangent, first-principles calculations
-
ZHOU A, LIU Y, LI S, et al. From structural ceramics to 2D materials with multi-applications: A review on the development from MAX phases to MXenes. Journal of Advanced Ceramics, 2021, 10(6): 1194-1242.
Keywords: MAX phases, MXenes, Ti3SiC2, Ti3C2Tx
-
ZHAO P, CAI Z, WU L, et al. Perspectives and challenges for lead-free energy-storage multilayer ceramic capacitors. Journal of Advanced Ceramics, 2021, 10(6): 1153-1193.
Keywords: multilayer ceramic capacitors (MLCCs), lead-free dielectric ceramics, energy storage, high power density
-
YUAN K, HAN D, LIANG J, et al. Microwave induced in-situ formation of SiC nanowires on SiCNO ceramic aerogels with excellent electromagnetic wave absorption performance. Journal of Advanced Ceramics, 2021, 10(5): 1140-1151.
Keywords: polymer-derived SiCNO ceramic aerogel, SiC nanowires (SiCnw), microwave heating, electromagnetic absorption (EMA) performance
-
WU P, SHI B, TU H, et al. Pomegranate-type Si/C anode with SiC taped, well-dispersed tiny Si particles for lithium-ion batteries. Journal of Advanced Ceramics, 2021, 10(5): 1129-1139.
Keywords: Si/C anode, anchored Si, SiC tape, magnesiothermic reduction, pomegranate like
-
ZHONG M, FENG Q, YUAN C, et al. Photocurrent density and electrical properties of Bi0.5Na0.5TiO3-BaNi0.5Nb0.5O3 ceramics. Journal of Advanced Ceramics, 2021, 10(5): 1119-1128.
Keywords: ferroelectric semiconductors, optical band gap, photovoltaic effect, impedance spectroscopy
-
ZHOU T, HOU C, ZHANG L, et al. Efficient spectral regulation in Ce:Lu3(Al,Cr)5O12 and Ce:Lu3(Al,Cr)5O12/Ce:Y3Al5O12 transparent ceramics with high color rendering index for high-power white LEDs/LDs. Journal of Advanced Ceramics, 2021, 10(5): 1107-1118.
Keywords: Ce,Cr:LuAG TC, spectral regulation, energy transfer, color rendering index (CRI), white LEDs/LDs
-
LIU W, ZUO R, ZHU T, et al. Forsterite-hydroxyapatite composite scaffolds with photothermal antibacterial activity for bone repair. Journal of Advanced Ceramics, 2021, 10(5): 1095-1106.
Keywords: forsterite scaffolds, hydroxyapatite (HA) coating, bone repair, photothermal effect, antibacterial activity
-
YU L, LIU H, FU Y, et al. Design and preparation of an ultra-high temperature ceramic by in-situ introduction of Zr2[Al(Si)]4C5 into ZrB2-SiC: Investigation on the mechanical properties and oxidation behavior. Journal of Advanced Ceramics, 2021, 10(5): 1082-1094.
Keywords: ZrB2-matrix composites, ultra-high temperature ceramics (UHTCs), mechanical properties, strengthening and toughening mechanism, oxidation behavior
-
FANG Z, YANG D, ZHENG Y, et al. NUV-pumped luminescence of thermally stable samarium-activated alkali metal borophosphate phosphor. Journal of Advanced Ceramics, 2021, 10(5): 1072-1081.
Keywords: KNa4B2P3O12 (KNBP), Sm3+ luminescence, concentration quenching, thermostability
-
ZHENG Z, WU W, YANG T, et al. In situ reduced MXene/AuNPs composite toward enhanced charging/discharging and specific capacitance. Journal of Advanced Ceramics, 2021, 10(5): 1061-1071.
Keywords: supercapacitors, MXene, gold nanoparticles (AuNPs), self-reduction, composite
-
LING Y, GUO T, GUO Y, et al. New two-layer Ruddlesden-Popper cathode materials for protonic ceramics fuel cells. Journal of Advanced Ceramics, 2021, 10(5): 1052-1060.
Keywords: protonic ceramics fuel cells (PCFCs), Ruddlesden-Popper (RP) phase, single-phase cathode, distribution of relaxation time (DRT) function, charge transfer
-
DU H, ZHANG Q, ZHAO B, et al. Novel hierarchical structure of MoS2/TiO2/Ti3C2Tx composites for dramatically enhanced electromagnetic absorbing properties. Journal of Advanced Ceramics, 2021, 10(5): 1042-1051.
Keywords: hierarchical hybrids, microwave absorbing properties, dielectric loss
-
SHAO Y, FENG K, GUO J, et al. Electronic structure and enhanced photoelectrocatalytic performance of RuxZn1-xO/Ti electrodes. Journal of Advanced Ceramics, 2021, 10(5): 1025-1041.
Keywords: RuxZn1-xO/Ti electrode, first-principles calculation, electric collector, photoelectric synergistic catalysis
-
ZHANG M, REN X, ZHANG M, et al. Preparation of ZrB2-MoSi2 high oxygen resistant coating using nonequilibrium state powders by self-propagating high-temperature synthesis. Journal of Advanced Ceramics, 2021, 10(5): 1011-1024.
Keywords: ZrB2-MoSi2 coatings, spark plasma sintering (SPS), high-temperature synthesis (SHS), active/inert oxidation, compound glass layer
-
LI J, TANG X, LIU Q, et al. Resistive switching and optical properties of strontium ferrate titanate thin film prepared via chemical solution deposition. Journal of Advanced Ceramics, 2021, 10(5): 1001-1010.
Keywords: SrTiO3, thin films, resistive switching, oxygen vacancy, first principles
-
MENG X, ZHANG Z, LIN D, et al. Effects of particle size of dielectric fillers on the output performance of piezoelectric and triboelectric nanogenerators. Journal of Advanced Ceramics, 2021, 10(5): 991-1000.
Keywords: polymer-matrix composites, nano composites, smart materials, electrical properties
-
LE PG, TRAN HT, LEE J-S, et al. Growth of single crystals in the (Na1/2Bi1/2)TiO3-(Sr1-xCax)TiO3 system by solid state crystal growth. Journal of Advanced Ceramics, 2021, 10(5): 973-990.
Keywords: (Na1/2Bi1/2)TiO3, lead-free piezoelectric, single crystal, microstructure, electrical properties
-
GONZALEZ PUENTE PM, SONG S, CAO S, et al. Garnet-type solid electrolyte: Advances of ionic transport performance and its application in all-solid-state batteries. Journal of Advanced Ceramics, 2021, 10(5): 933-972.
Keywords: Li7La3Zr2O12 (LLZO), solid electrolytes, lithium ionic conductivity, lithium concentration, mobility of lithium-ion, air stability, solid-state batteries
-
YANG H, ZHANG S, YANG H, et al. The latest process and challenges of microwave dielectric ceramics based on pseudo phase diagrams. Journal of Advanced Ceramics, 2021, 10(5): 885-932.
Keywords: high-temperature microwave dielectric ceramics (MWDCs), pseudo phase diagram, developments and challenges, composition-structure-property relationship
-
DU B, CHENG Y, XUN L, et al. Using PyC modified 3D carbon fiber to reinforce UHTC under low temperature sintering without pressure. Journal of Advanced Ceramics, 2021, 10(4): 871-884.
Keywords: ultra-high temperature ceramic (UHTC), pyrolytic carbon interface layer, carbon fiber
-
XU W, ZHANG Z, LIU C, et al. Substantial thermoelectric enhancement achieved by manipulating the band structure and dislocations in Ag and La co-doped SnTe. Journal of Advanced Ceramics, 2021, 10(4): 860-870.
Keywords: SnTe, band convergence, dislocation, Ag and La co-doping, thermoelectric performance
-
WANG L, AN L, ZHAO J, et al. High-strength porous alumina ceramics prepared from stable wet foams. Journal of Advanced Ceramics, 2021, 10(4): 852-859.
Keywords: porous ceramic, alumina, dispersant, hydrophobic modifier, compressive strength
-
LIU N, MEI L, BIN J, et al. Effect of anionic group [SiO4]4-/[PO4]3- on the luminescence properties of Dy3+-doped tungstate structural compounds. Journal of Advanced Ceramics, 2021, 10(4): 843-851.
Keywords: phosphors, scheelite structure, luminescence property, anion substitution
-
DU B, CAI M, WANG X, et al. Enhanced electromagnetic wave absorption property of binary ZnO/NiCo2O4 composites. Journal of Advanced Ceramics, 2021, 10(4): 832-842.
Keywords: ZnO particles, dielectric loss, magnetic loss, electromagnetic wave absorption
-
CEN Z, BIAN S, XU Z, et al. Simultaneously improving piezoelectric properties and temperature stability of Na0.5K0.5NbO3 (KNN)-based ceramics sintered in reducing atmosphere. Journal of Advanced Ceramics, 2021, 10(4): 820-831.
Keywords: lead-free piezoelectric ceramics, reducing atmosphere, fatigue property, temperature stability
-
YAN T, CHEN K, LI C, et al. Structure evolution, dielectric, and conductivity behavior of (K0.5Na0.5)NbO3-Bi(Zn2/3Nb1/3)O3 ceramics. Journal of Advanced Ceramics, 2021, 10(4): 809-819.
Keywords: crystal structure, dielectric spectroscopy, oxygen vacancies
-
NIE G, LI Y, SHENG P, et al. Microstructure refinement-homogenization and flexural strength improvement of Al2O3 ceramics fabricated by DLP-stereolithography integrated with chemical precipitation coating process. Journal of Advanced Ceramics, 2021, 10(4): 790-808.
Keywords: stereolithography, flexural strength, reliability, thermal conductivity, microstructure
-
ZHOU X, LIU L, SUN J, et al. Effects of (Mg1/3Sb2/3)4+ substitution on the structure and microwave dielectric properties of Ce2Zr3(MoO4)9 ceramics. Journal of Advanced Ceramics, 2021, 10(4): 778-789.
Keywords: crystal structure, Phillips-van Vechten-Levine (P-V-L) theory, microwave dielectric property, (Mg1/3Sb2/3) doping
-
LONG X, WU Z, SHAO C, et al. High-temperature oxidation behavior of SiBN fibers in air. Journal of Advanced Ceramics, 2021, 10(4): 768-777.
Keywords: microwave-transparent, SiBN fibers, high-temperature, oxidation resistance
-
SONG C, LIU Y, YE F, et al. Enhanced mechanical property and tunable dielectric property of SiCf/SiC-SiBCN composites by CVI combined with PIP. Journal of Advanced Ceramics, 2021, 10(4): 758-767.
Keywords: SiCf/SiC-SiBCN composites, chemical vapor infiltration (CVI), polymer infiltration pyrolysis (PIP), mechanical property, electromagnetic characteristic
-
LUN H, ZENG Y, XIONG X, et al. Oxidation behavior of non-stoichiometric (Zr,Hf,Ti)Cx carbide solid solution powders in air. Journal of Advanced Ceramics, 2021, 10(4): 741-757.
Keywords: ultra-high temperature ceramics (UHTCs), (Zr,Hf,Ti)Cx carbides, oxidation behavior, oxidation resistance, free-pressureless spark plasma sintering
-
LIU X, QIAN X, ZHENG P, et al. Composition and structure design of three-layered composite phosphors for high color rendering chip-on-board light-emitting diode devices. Journal of Advanced Ceramics, 2021, 10(4): 729-740.
Keywords: three-layered composite phosphor, structure design, high color rendering, luminous efficacy
-
MO Z, YANG W, GAO S, et al. Efficient oxygen reduction reaction by a highly porous, nitrogen-doped carbon sphere electrocatalyst through space confinement effect in nanopores. Journal of Advanced Ceramics, 2021, 10(4): 714-728.
Keywords: precious-metal-free electrocatalyst, biomass resource, space confinement effect, 2e+2e pathway, oxygen reduction reaction (ORR)
-
REN W, YANG G-D, FENG A-L, et al. Annealing effects on the optical and electrochemical properties of tantalum pentoxide films. Journal of Advanced Ceramics, 2021, 10(4): 704-713.
Keywords: Ta2O5 films, anneal, optical property, electrochemical stability
-
LI D, ZENG X, LI Z, et al. Progress and perspectives in dielectric energy storage ceramics. Journal of Advanced Ceramics, 2021, 10(4): 675-703.
Keywords: energy storage ceramics, dielectric, relaxor ferroelectric, antiferroelectric, pulse power capacitor
-
HE R, ZHOU N, ZHANG K, et al. Progress and challenges towards additive manufacturing of SiC ceramic. Journal of Advanced Ceramics, 2021, 10(4): 637-674.
Keywords: silicon carbide (SiC), additive manufacturing (AM), structural ceramics
-
YAN J, WANG Y, WANG C-M, et al. Boosting energy storage performance of low-temperature sputtered CaBi2Nb2O9 thin film capacitors via rapid thermal annealing. Journal of Advanced Ceramics, 2021, 10(3): 627-635.
Keywords: bismuth layer-structured ferroelectrics (BLSFs), calcium bismuth niobate , nanograin films, rapid thermal annealing (RTA), energy storage, fatigue-resistance
-
ZHAO T, LIAN M-M, QIN Y, et al. Improved performances of lithium disilicate glass-ceramics by seed induced crystallization. Journal of Advanced Ceramics, 2021, 10(3): 614-626.
Keywords: lithium disilicate (LD), seeds, mechanical properties, translucency
-
SUN Y, XIANG H, DAI F-Z, et al. Preparation and properties of CMAS resistant bixbyite structured high-entropy oxides RE2O3 (RE = Sm, Eu, Er, Lu, Y, and Yb): Promising environmental barrier coating materials for Al2O3f/Al2O3 composites. Journal of Advanced Ceramics, 2021, 10(3): 596-613.
Keywords: high-entropy ceramics, rare earth oxides, low thermal conductivity, thermal expansion coefficient, CMAS resistance
-
CHEN C, WANG Y, LI Z-Y, et al. Evolution of electromechanical properties in Fe-doped (Pb,Sr)(Zr,Ti)O3 piezoceramics. Journal of Advanced Ceramics, 2021, 10(3): 587-595.
Keywords: lead–zirconate–titanate (PZT), piezoelectric, acceptor, defect engineering, electromechanical properties
-
SHI L-K, ZHOU X, DAI J-Q, et al. Microstructure and properties of nano-laminated Y3Si2C2 ceramics fabricated via in situ reaction by spark plasma sintering. Journal of Advanced Ceramics, 2021, 10(3): 578-586.
Keywords: rare earth silicide carbides, spark plasma sintering (SPS), ternary layered structure ceramic, properties, MAX
-
LI K, WANG J, BLATOV VA, et al. Crystal and electronic structure engineering oftin monoxide by external pressure. Journal of Advanced Ceramics, 2021, 10(3): 565-577.
Keywords: SnO, van der Waals (vdW), topological relationship, phase transition, band gap
-
LI D, JIANG P, GAO R, et al. Experimental and numerical investigation on the thermal and mechanical behaviours of thermal barrier coatings exposed to CMAS corrosion. Journal of Advanced Ceramics, 2021, 10(3): 551-564.
Keywords: thermal barrier coating (TBC), calcium–magnesium–alumino–silicate (CMAS) corrosion, corrosion model, temperature field, stress field
-
ZENG Q, GAO Y, GUAN K, et al. Machine learning and a computational fluid dynamic approach to estimate phase composition of chemical vapor deposition boron carbide. Journal of Advanced Ceramics, 2021, 10(3): 537-550.
Keywords: machine learning (ML), computational fluid dynamic (CFD), chemical vapor deposition, boron carbide (B4C), B/C ratio, kinetic mechanisms
-
FAN X, MA Y, DENG Y, et al. Microstructure and mechanical properties of Zr3Al3C5-based ceramics synthesized by Al–Si melt infiltration. Journal of Advanced Ceramics, 2021, 10(3): 529-536.
Keywords: ultra-high-temperature ceramics (UHTCs), twin, carbide, Al–Si alloy, MAX
-
ZHANG C, FAN Y, ZHAO J, et al. Corrosion resistance of non-stoichiometric gadolinium zirconate fabricated by laser-enhanced chemical vapor deposition. Journal of Advanced Ceramics, 2021, 10(3): 520-528.
Keywords: thermal barrier coating (TBC), gadolinium zirconate (GZ), nonstoichiometry, corrosion resistance
-
LIU L, HUANG X, WEI Z, et al. Solvents adjusted pure phase CoCO3 as anodes for high cycle stability. Journal of Advanced Ceramics, 2021, 10(3): 509-519.
Keywords: lithium ion battery (LIB), cobalt carbonate, solvothermal method, morphological control, solvent, pure phase
-
HAO Y, XIE J, XU B, et al. Tunnel elasticity enhancement effect of 3D submicron ceramics (Al2O3, TiO2, ZrO2) fiber on polydimethylsiloxane (PDMS). Journal of Advanced Ceramics, 2021, 10(3): 502-508.
Keywords: ceramic fiber, tunnel elasticity enhancement effect, solution blowing spinning
-
QIU B, DUAN X, ZHANG Z, et al. Microstructural evolution of h-BN matrix composite ceramics with La–Al–Si–O glass phase during hot-pressed sintering. Journal of Advanced Ceramics, 2021, 10(3): 493-501.
Keywords: h-BN matrix composite ceramics, La–Al–Si–O glass phase, microstructural evolution, nanocrystalline precipitation, mechanical properties
-
NIU X, JIAN X, CHEN X, et al. Enhanced electrocaloric effect at room temperature in Mn2+ doped lead-free (BaSr)TiO3 ceramics via a direct measurement. Journal of Advanced Ceramics, 2021, 10(3): 482-492.
Keywords: barium strontium titanate ceramics, permittivity, dielectric loss, electrocaloric effect, electrocaloric strength
-
GUO L, LI G, GAN Z. Effects of surface roughness on CMAS corrosion behavior for thermal barrier coating applications. Journal of Advanced Ceramics, 2021, 10(3): 472-481.
Keywords: thermal barrier coating (TBC), calcium–magnesium–alumina–silicate (CMAS), surface roughness, wetting, spreading
-
RASAKI SA, XIONG D, XIONG S, et al. Photopolymerization-based additive manufacturing of ceramics: A systematic review. Journal of Advanced Ceramics, 2021, 10(3): 442-471.
Keywords: photopolymerization, stereolithography, additive manufacturing, 3D printing, polymer-derived ceramics
-
XIANG H, XING Y, DAI F-z, et al. High-entropy ceramics: Present status, challenges, and a look forward. Journal of Advanced Ceramics, 2021, 10(3): 385-441.
Keywords: high-entropy ceramics (HECs), processing, structure, properties, applications
-
ZHENG Y, ZOU M, ZHANG W, et al. Electrical and thermal transport behaviours of high-entropy perovskite thermoelectric oxides. Journal of Advanced Ceramics, 2021, 10(2): 377-384.
Keywords: high entropy, thermoelectric oxides, thermal conductivity, electrical conductivity, oxygen vacancy
-
TIAN W, YAN F, CAI C, et al. Freeze-drying and hot-pressing strategy to embed two-dimensional Ti0.87O2 monolayers in commercial polypropylene films with enhanced dielectric properties. Journal of Advanced Ceramics, 2021, 10(2): 368-376.
Keywords: Ti0.87O2 nanosheets, polypropylene (PP), freeze-drying, surface functionalization, hot-pressing, dielectric constant
-
YANG W, CHEN Y, GAO S, et al. Post-illumination activity of Bi2WO6 in the dark from the photocatalytic "memory" effect. Journal of Advanced Ceramics, 2021, 10(2): 355-367.
Keywords: Bi2WO6, photocatalytic "memory" effect, energy storage/release, activity in the dark, stability
-
WU X, LIANG X, ZHANG X, et al. Structural evolution of plasma sprayed amorphous Li4Ti5O12 electrode and ceramic/polymer composite electrolyte during electrochemical cycle of quasi-solid-state lithium battery. Journal of Advanced Ceramics, 2021, 10(2): 347-354.
Keywords: plasma spraying, Li4Ti5O12 (LTO) electrode, ceramic/polymer composite electrolyte, electrochemical cycle, quasi-solid-state lithium battery
-
CHEN M, JIA Y, LI H, et al. Enhanced pyrocatalysis of the pyroelectric BiFeO3/g-C3N4 heterostructure for dye decomposition driven by cold-hot temperature alternation. Journal of Advanced Ceramics, 2021, 10(2): 338-346.
Keywords: pyroelectric material, BiFeO3, g-C3N4, heterostructure, pyrocatalysis
-
LI P, YANG W, TIAN C, et al. Electrochemical performance of La2NiO4+δ-Ce0.55La0.45O2-δ as a promising bifunctional oxygen electrode for reversible solid oxide cells. Journal of Advanced Ceramics, 2021, 10(2): 328-337.
Keywords: La2NiO4+δ (LNO), oxygen electrode, electrochemical performance, reversible solid oxide cells (RSOCs)
-
KE S, LUO S, GONG J, et al. Electric modulation of conduction in MAPbBr3 single crystals. Journal of Advanced Ceramics, 2021, 10(2): 320-327.
Keywords: resistive switching (RS), rectifying behavior, hybrid organic-inorganic perovskites, p-n structure
-
FANG X, JIANG L, PAN L, et al. High-thermally conductive AlN-based microwave attenuating composite ceramics with spherical graphite as attenuating agent. Journal of Advanced Ceramics, 2021, 10(2): 301-319.
Keywords: spherical graphite (SG), aluminum nitride, thermal conductivity, dielectric property, microwave absorption
-
WEI Z, LI K, GE B, et al. Synthesis of nearly spherical AlN particles by an in-situ nitriding combustion route. Journal of Advanced Ceramics, 2021, 10(2): 291-300.
Keywords: combustion synthesis, AlN, microstructure, growth mechanism
-
ZHU Z, GONG Z, QU P, et al. Additive manufacturing of thin electrolyte layers via inkjet printing of highly-stable ceramic inks. Journal of Advanced Ceramics, 2021, 10(2): 279-290.
Keywords: inkjet printing, water-based ceramic ink, solid oxide fuel cell (SOFC) electrolyte, 8YSZ, ink stability, rheological properties
-
LI X, SNETKOV IL, YAKOVLEV A, et al. Fabrication and performance evaluation of novel transparent ceramics RE:Tb3Ga5O12 (RE = Pr, Tm, Dy) toward magneto-optical application. Journal of Advanced Ceramics, 2021, 10(2): 271-278.
Keywords: magneto-optical material, rare earth (RE):terbium gallium garnet (TGG) ceramics, Verdet constant, thermo-optical properties
-
LI H, ZHANG H, THAYIL S, et al. Enhanced aging and thermal shock performance of Mn1.95-xCo0.21Ni0.84SrxO4 NTC ceramics. Journal of Advanced Ceramics, 2021, 10(2): 258-270.
Keywords: Sr-doped Mn-Co-Ni-O materials, negative temperature coefficient (NTC) ceramics, electrical properties, thermal shock cycling
-
LI R, YANG W, GAO S, et al. Hydrous cerium oxides coated glass fiber for efficient and long-lasting arsenic removal from drinking water. Journal of Advanced Ceramics, 2021, 10(2): 247-257.
Keywords: hydrous cerium oxide (HCO), glass fiber cloth (GFC), column test, adsorption kinetics, adsorption mechanism
-
PERMIN DA, BOLDIN MS, BELYAEV AV, et al. IR-transparent MgO-Gd2O3 composite ceramics produced by self-propagating high-temperature synthesis and spark plasma sintering. Journal of Advanced Ceramics, 2021, 10(2): 237-246.
Keywords: MgO-Gd2O3, self-propagating high-temperature synthesis (SHS), spark plasma sintering (SPS), optical properties, infra-red (IR) ceramics
-
WANG J, CAO L, ZHANG Y, et al. Effect of mass transfer channels on flexural strength of C/SiC composites fabricated by femtosecond laser assisted CVI method with optimized laser power. Journal of Advanced Ceramics, 2021, 10(2): 227-236.
Keywords: C/SiC, laser assisted-chemical vapor infiltration (LA-CVI), mass transfer channels, laser power, flexural strength
-
ZHAO D, GUO T, FAN X, et al. Effect of pyrolytic carbon interphase on mechanical properties of mini T800-C/SiC composites. Journal of Advanced Ceramics, 2021, 10(2): 219-226.
Keywords: T800 carbon fiber, C/SiC, pyrolytic carbon (PyC) interphase, tensile strength, Weibull modulus
-
CHEN Z, SUN X, SHANG Y, et al. Dense ceramics with complex shape fabricated by 3D printing: A review. Journal of Advanced Ceramics, 2021, 10(2): 195-218.
Keywords: 3D printing, dense ceramics, particle characteristics, process parameters
-
LI J, YU Q, LI D, et al. Formation of hierarchical Si3N4 foams by protein-based gelcasting and chemical vapor infiltration. Journal of Advanced Ceramics, 2021, 10(1): 187-193.
Keywords: sintering, porosity, mechanical properties, permeability
-
TONG S. Size and temperature effects on dielectric breakdown of ferroelectric films. Journal of Advanced Ceramics, 2021, 10(1): 181-186.
Keywords: film thickness, electrode size, ceramics, energy storage
-
ZHANG Y, SUN S-K, GUO W-M, et al. Optimal preparation of high-entropy boride-silicon carbide ceramics. Journal of Advanced Ceramics, 2021, 10(1): 173-180.
Keywords: high-entropy boride-silicon ceramics, borothermal reduction, boro/carbothermal reduction, microstructure, mechanical properties
-
QIN M, YAN Q, LIU Y, et al. A new class of high-entropy M3B4 borides. Journal of Advanced Ceramics, 2021, 10(1): 166-172.
Keywords: high-entropy ceramics, high-entropy borides, reactive sintering, spark plasma sintering, Ta3B4-prototyped orthorhombic structure
-
SUCHANICZ J, KLUCZEWSKA-CHMIELARZ K, SITKO D, et al. Electrical transport in lead-free Na0.5Bi0.5TiO3 ceramics. Journal of Advanced Ceramics, 2021, 10(1): 152-165.
Keywords: Na0.5Bi0.5TiO3 (NBT) ceramics, electrical properties, Seebeck coefficient, impedance spectroscopy
-
SCHLECH T, HORN S, WIJAYAWARDHANA C, et al. Experimental and FEM based investigation of the influence of the deposition temperature on the mechanical properties of SiC coatings. Journal of Advanced Ceramics, 2021, 10(1): 139-151.
Keywords: nanoindentation, finite element analysis, coatings, fracture mechanics
-
LORENZ M, TRAVITZKY N, RAMBO CR. Effect of processing parameters on in situ screen printing-assisted synthesis and electrical properties of Ti3SiC2-based structures. Journal of Advanced Ceramics, 2021, 10(1): 129-138.
Keywords: MAX phases, Ti3SiC2, screen printing, in situ synthesis, electrical conductivity
-
WU X, WANG S, WONG-NG W, et al. Novel optical properties and induced magnetic moments in Ru-doped hybrid improper ferroelectric Ca3Ti2O7. Journal of Advanced Ceramics, 2021, 10(1): 120-128.
Keywords: oxides, electronic materials, optical properties, X-ray diffraction, defects, electronic structure, ferroelectricity
-
YIN C, YU Z, SHU L, et al. A low-firing melilite ceramic Ba2CuGe2O7 and compositional modulation on microwave dielectric properties through Mg substitution. Journal of Advanced Ceramics, 2021, 10(1): 108-119.
Keywords: dielectric properties, melilite structure, compositional modulation
-
ZHOU S, LIN D, SU Y, et al. Enhanced dielectric, ferroelectric, and optical properties in rare earth elements doped PMN-PT thin films. Journal of Advanced Ceramics, 2021, 10(1): 98-107.
Keywords: PMN-PT, rare earth doping, dielectric, ferroelectric, photoluminescence
-
WANG Z, LIN H, ZHANG D, et al. Deep-red emitting Mg2TiO4:Mn4+ phosphor ceramics for plant lighting. Journal of Advanced Ceramics, 2021, 10(1): 88-97.
Keywords: solid state reaction, optical properties, thermal conductivity, ceramic phosphor
-
LIU H, LIU J, HONG Z, et al. Preparation of hollow fiber membranes from mullite particles with aid of sintering additives. Journal of Advanced Ceramics, 2021, 10(1): 78-87.
Keywords: mullite, sintering additives, hollow fiber, membranes, sintering behavior
-
ZHANG W, ZHAO B, XIANG H, et al. One-step synthesis and electromagnetic absorption properties of high entropy rare earth hexaborides (HE REB6) and high entropy rare earth hexaborides/borates (HE REB6/HE REBO3) composite powders. Journal of Advanced Ceramics, 2021, 10(1): 62-77.
Keywords: high entropy rare earth hexaborides, one-step synthesis, electromagnetic wave absorbing properties, synergistic dielectric and magnetic losses, wide effective absorption bandwidth
-
YAVETSKIY RP, BALABANOV AE, PARKHOMENKO SV, et al. Effect of starting materials and sintering temperature on microstructure and optical properties of Y2O3:Yb3+ 5 at% transparent ceramics. Journal of Advanced Ceramics, 2021, 10(1): 49-61.
Keywords: transparent ceramics, reactive sintering, microstructure, grain growth, lasing
-
YAO Y, QIN W, XING B, et al. High performance hydroxyapatite ceramics and a triply periodic minimum surface structure fabricated by digital light processing 3D printing. Journal of Advanced Ceramics, 2021, 10(1): 39-48.
Keywords: hydroxyapatite (HA), 3D printing, sintering atmosphere, mechanical property, bioactivity, digital light processing (DLP)
-
CHEN B, DING Q, NI D, et al. Microstructure and mechanical properties of 3D Cf/SiBCN composites fabricated by polymer infiltration and pyrolysis. Journal of Advanced Ceramics, 2021, 10(1): 28-38.
Keywords: Cf/SiBCN, ceramic matrix composites, dicumyl peroxide (DCP), X-ray computed tomography (XCT)
- HASSANIN H, ESSA K, ELSHAER A, et al. Micro-fabrication of ceramics: Additive manufacturing and conventional technologies. Journal of Advanced Ceramics, 2021, 10 (1): 1-27.
Keywords: micro-electro-mechanical system (MEMS), micro-fabrication, micro parts, additive manufacturing
|